|
|
|
|---|---|
|
Som sagt var i dag tändes den gula motorlampan, när jag använder CS och interfacet från Kina viasr det på DME-modulen: 30 ignition coil: cylinder 3 The ignition timing was to long or to short. Verify the ignitton coil the sparks and the spark plug electrode distance. If there no ignition at all: Veify if there is an open circuit at the conduction of the ignition coil or in the power supply of the ignition coil. Verify also if there is an short circuit to ground or positive in the primary or secondary circuit. Verify also the wiring and connection from the ZCR measure resistance Vad tror ni på forumet mest på? | |
| Efter en del pusslande kom jag fram till att det är 3-ans tändspole som gett upp | |
|
Det var nog också det mest troliga. Bra att du fick utförliga förslag från programmet. Känn gärna på jordanslutningarna till alla spolarna, glapp där kan ställa till problem. FP |
|
|
|
|
Du måste vara en registrerad användare för att kunna göra inlägg här.
Klicka här för att registrera dig. Registreringen är gratis.
Är du redan användare? Logga in i menyn.
Klicka här för att registrera dig. Registreringen är gratis.
Är du redan användare? Logga in i menyn.